Vibration Assessment And Survey
What are the hazards of exposure to vibration?
Exposure to vibration can cause several types of damages to the human body. There predefined levels by the legislation regarding the exposure values to vibration to ensure safety and wellbeing of employees at workplace. There values are exposure action value (EAV) and exposure limit value (ELV). There are typically two types of exposure to vibrations at workplaces:
-
- Hands-Arm vibration (HAV) exposure.
- Whole-Body Vibration (WBV) exposure.
Over a prolonged period of time, WBV type of exposure takes a toll on the body. Exposure to these vibrations can cause serious physical problems ranging from chronic back pain to nerve or organ damages. WBV introduces many challenges due to the fact that the actual vibration if transmitted through body may be amplified and also the posture and physics of the employee would be influencing the effects. WBV measurements are very complicated and costly. If proper control measures are in place and the systems design and installation follows good engineering practices the likelihood of WBV risk would be fairly low.
What is the Vibration Survey?
Vibration survey is done through measurement of vibrations (high accuracy vibration with three axis measurements) using accelerometers and reading the values through a signal that is delivered from the accelerometer to the actual receiver and analysing the results into a spectrum of frequency of vibrations. The measurements for HAV are quiet simple and can be done with normal measurements techniques. However WBV require high precision three axis measurements and highly technical and details analysis for further evaluation and assessment.
What should the company do?
The main relevant legislation covering the control of vibration in the workplace is the Safety, Health and Welfare at Work (General Application) Regulations 2007, Chapter 2: Control of Vibration at Work. Under these regulations, where employees are or are likely to be exposed to risks to their safety or health arising from exposure to mechanical vibration during their work, employer is obliged to make a suitable and appropriate assessment of the risk arising from such exposure.
What can Occupli Consultancy offer?
Occupli Consultancy is a leading provider of Workplace Vibration Survey and Assessments to clients for many years. Our specific deliverables in this area include Vibration monitoring and survey, vibration risk assessments, measurement and reporting. Our specialist consultants have many years of practical experience and expertise in assessing your needs in terms of current vibration Legislation.
At Occupli Consultancy we pride ourselves on the quality and value of the services that we provide our clients. Our Vibration Consultants will identify and assess the risks posed by vibration in your workplace and environment in accordance with all current Irish vibration legislation and current best practices. We have provided occupational and environmental vibration consultancy services to clients for many years now. We have assisted large clients with regulatory compliance right through to supporting clients with specific issues or areas that require measurement and advice.
Vibration risk assessment and measurement (Whole Body and Hand-Arm) are also areas where we have provided an increasing amount of support to clients over the last number of years. We can provide cost-effective solutions for both occupational and environmental vibration surveys. If you have any questions about this topic or would like to discuss the area with our specialists please contact us through the enquiry form below.