Chris Mee Group Safety Statements

Machinery Safety

Occupli Consultancy is a leading provider of Machinery Safety Support to many clients nationally. Our specialists provide practical advice, training and machinery solutions to support your particular needs. Our team work to legislative requirements and benchmark against industry best practice.

Services Provided By Occupli Consultancy

Occupli consultants provide the following non-exhaustive list of machinery related services:


  • CE compliance and review of relevant directives and standards
  • Equipment hazard analysis and risk assessment
  • Creation of safety concept and generation of a safety design review
  • Evaluation of compliance with the Essential Health and Safety Requirements (EHSR)
  • Compiling legally required documents for CE marking including technical construction files, etc

Contact the Consultancy Team Today


+353 1 517 5270


+353 818 315 415

Occupli Consultancy can also review the machinery and its interface with the production process. We also involve operations and maintenance personnel to identify their main safety concerns. This type of assessment includes:


  • A risk assessment of both mechanical and non-mechanical hazards on individual machines
  • Assessment of the existing risk reduction measures
  • A review of the viability of upgrading the safety of the machine
  • Prioritised recommendations on approach to improve current status


Applicable Irish Legislation


Legislation relating to machinery safety has evolved rapidly over recent years. Under the Safety, Health and Welfare at Work Act (General Application) Regulations 2007, Chapter 2 of Part 2: Use of Work Equipment, an employer is required to ensure “any work equipment provided for use by employees at a place of work complies, as appropriate, with the provisions of any relevant enactment implementing any relevant Directive of the European Communities relating to work equipment with respect to safety and health”.

The European Communities (Machinery) Regulations 2008 (S.I. No. of 2008) requires that a CE mark be affixed to the machinery and the supplier is required to issue a Declaration of Conformance, unless the machinery is to be incorporated into other machinery, in which case it directs that the CE mark shall not be affected.


  • It is a requirement for all machinery that a Technical File can, or for some machines, must be compiled. In practice, this often means compiling it as a project progresses
  • Complying with applicable mandatory Essential Health and Safety Requirements (EHSRs) from a long list given in the directive
  • Undertaking the correct conformity assessment procedure

Did you know that Occupli also offer Electrostatic Surveys?

Sign up to get our Newsletter!


Enquire about Machinery Safety Consultancy

[contact-form-7 id=”2309″ title=”Machinery Safety Consultancy – Quick Enquiry”]

Can’t find what you’re looking for?